E-materiały do kształcenia zawodowego

Technik spawalnictwa / Welding technician

Język obcy zawodowy

Podstawy spawalnictwa

bg‑gray3

Introduction to MMA Welding: Process, Workstation, Electrode Structure, and Personal Protective Equipment – Schemes

Wprowadzenie do spawania MMA: proces, stanowisko pracy, budowa elektrody oraz środki ochrony indywidualnej – schematy

Spis treści

Spis treści

1

MMA (Manual Metal Arc) welding process

The diagram illustrates the MMA (Manual Metal Arc) welding process, that is, arc welding with a covered electrode. It shows a cross‑section of a weld pool, an electrode, and the thermal effects of an electric arc. The key elements of the process are labeled, such as the electrode structure, melting zone, and by‑products, to help understand the physics and technique behind manual arc welding.

RXL3JD4OJQCZR1
MMA (Manual Metal Arc) welding process

Source: Akademia Techniczno-Artystyczna Nauk Stosowanych / Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji, licencja: CC BY 4.0.

Powrót do spisu treściPowrót do spisu treści

2

MMA welding workstation

The drawing illustrates a manual MMA welding workstation.

R8QB6Q7AKXSV41
MMA welding workstation
Source: Akademia Techniczno-Artystyczna Nauk Stosowanych / Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji, licencja: CC BY 4.0.

Powrót do spisu treściPowrót do spisu treści

3

The structure of a covered electrode

The diagram presents the structure of a covered electrode used in manual metal arc welding (MMA welding). The labeled elements include:

  • Metal core of the electrode

  • Outer coating (uniform protective layer)

  • Identification ring (colored marking band)

  • Electrode marking (e.g., E6013)

  • Electrode length

  • Core diameter

  • Ignition point (electrode tip)

  • Manufacturer’s marking.

In the upper right corner of the diagram, a magnified cross‑section of the electrode coating is shown, illustrating its layered functional structure:

  • Ignition layer – Facilitates arc striking.

  • Gas‑forming layer – Produces the shielding atmosphere.

  • Slag‑forming layer – Protects the weld pool by forming a shielding slag.

RAFFXV5MAKCRX1
Structure of a covered electrode
Source: Akademia Techniczno-Artystyczna Nauk Stosowanych / Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji, licencja: CC BY 4.0.

Powrót do spisu treściPowrót do spisu treści

4

PPE (Personal Protective Equipment)

The drawing shows the complete set of personal protective equipment (PPE) worn by a welder at work. The labeled items include:

  • Welding helmet – Protects the eyes and face from arc radiation and molten metal splatter.

  • Safety goggles – Worn under the helmet or on their own during preparation work; protect the eyes from dust and sparks.

  • Welding gloves – Made of leather, resistant to heat and mechanical damage.

  • Welding jacket – Flame‑resistant and covers the entire torso and arms; protects against heat and splatter.

  • Leather apron – Extra protection for the chest and abdomen; often used when welding in a seated position.

  • Flame‑resistant trousers – Cuffless and fully covering the legs; fit snugly over the boots.

  • Steel‑toe work boots – Protect the feet from falling heavy objects and molten metal.

  • Boot covers – Prevent hot spatter from entering the boots.

  • Ear protectors or earplugs – Reduce noise, especially in environments with auxiliary machinery.

  • Cotton underclothing (no synthetics) – Prevents melted fabric from sticking to the skin in case of ignition.

R17HDJ3HBCSUG1
PPE (Personal Protective Equipment)
Source: Akademia Techniczno-Artystyczna Nauk Stosowanych / Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji, licencja: CC BY 4.0.

Powrót do spisu treściPowrót do spisu treści

5

Ćwiczenia

Exercise 1

Level B1

Poziom B1

Based on the diagram depicting the MMA welding process, complete the following sentences by filling in the blanks with the appropriate terms. Each sentence refers to a specific element of the welding process.

Na podstawie schematu przedstawiającego proces spawania MMA, uzupełnij poniższe zdania, wstawiając odpowiednie sformułowania w puste miejsca. Każde zdanie odnosi się do konkretnego elementu procesu spawania.

Hintazurewhite
R1EG3C1CPHCZZ

Powrót do spisu treściPowrót do spisu treści